How do I exchange my toolbelt for a different size?

Exchanges - No sweat. If your belt doesn’t fit right, we’ll swap it out. Just reach out within 30 days and we’ll get you the size you need. Just fill out this form to request your exchange: https://perkinsbuilderbelt.com/pages/request-an-exchange

What is your return policy?

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return. To receive a full refund, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging.Get started with a return request here: https://perkinsbuilderbelt.com/pages/request-a-return

How do I start a return?

We offer a 30-day return policy. If it doesn’t work for you, send it back in original condition for a full refund. Get started with a return request here: https://perkinsbuilderbelt.com/pages/request-a-return

How to track my order?

Please track your order at our Tracking page https://17track.net/en

Do you ship internationally?

Yes, we do ship internationally. The shipping fee may vary depending on your location.

What is your return policy?

We offer a 30-day return policy. If it doesn’t work for you, send it back in original condition for a full refund. Get started with a return request here: https://perkinsbuilderbelt.com/pages/request-a-return

What should I do if my item is damaged or defective?

Please inspect your order when it arrives. If anything is damaged or defective, email us immediately at stud@perkinsbuilderbelt.com with photos of the issue so we can resolve it ASAP.If something breaks over time, please get started with our Warranty Process.

Do you offer expedited shipping options?

Yes, expedited shipping is available at checkout. Please note: delivery timeframes are not guaranteed on weekends or holidays.

How do I know what size toolbelt I need?

The belt is designed to sit around your lower back. To find the right size, start at your belly button and wrap a tape measure around your torso. Our belts feature adjustable elements to ensure a secure, comfortable fit. See our sizing chart below for full details.

Is the belt for right- or left-handed builders?

The setup is modular and ambidextrous. You can rearrange pouches to whichever side suits your dominant hand.

How do I adjust the suspenders?

We recommend watching our adjustment video here.

How do I set up my tool belt?

Watch our setup guide videos here.

Will the suspenders fit someone who is 6 feet 8 inches tall?

Yes — the suspenders are fully adjustable and designed to fit builders up to 7 feet tall. Tall frame? No problem — you’ll have plenty of strap length and adjustment range for a secure, comfortable fit.

What are the dimensions of the Knife and Cat's Paw Pouch?

The Knife and Cat's Paw Pouch measures approximately 12.25 inches in height and 7.625 inches in length. The width (or depth) is variable depending on how full the pouch is, but it typically averages around 4 inches.

What are the dimensions of the Tape and Chisel Pouch?

The Tape and Chisel Pouch measures approximately 14 inches in height and 10.75 inches in length. The width (or depth) is variable depending on how full the pouch is, but it typically averages around 6 inches.

Will the tape pocket hold a 35' FatMax?

Yes — it fits in the top tape pouch. The pouch is shallow for quick access, even with gloves on.

Can I carry a torpedo level in the belt, or do I need an add-on pouch?

The main rig has pockets that can hold a torpedo level. For a dedicated space, we recommend our 10” bolt pouch.

Where’s the nail pouch?

Nails can be stored in either of the main pouches. For higher capacity, check out our 5” or 10” bolt pouches.

Is there enough room to carry nails in the toolbelt?

Yes — both main pouches can hold nails. For added fastener storage, our 5” and 10” clip-on bolt pouches are available as add-ons.5" Bolt Pouch10" Bolt Pouch

What size is the phone pocket?

The phone pocket measures 3.3 inches wide and 7 inches tall. However, the pocket stretches to fit phones up to 4.1" wide. If you're using a bulky case, the fit may be tighter, but it still works for most setups.

Will the smartphone holder fit a Samsung S24 Ultra?

Yes — it fits phones up to 4.1" wide. The S24 Ultra is 3.3" wide, so it will slide in and out comfortably in most cases. If you're using a bulky case, the fit may be tighter, but it still works for most setups.

How much do the belt and suspenders weigh together?

The belt and suspenders together weigh approximately 6.5 lbs.

Where can I hang my drill or impact?

The center strap or belt body itself works well for drills. Erik hangs his drill on the back of his own setup! You can also use our Clip-On Tool Belt Drill Holder for Cordless Drill, Tape Measure, and Impact Driver.

Does the toolbelt have a California Prop 65 warning?

Yes, it does. You can review the warning details here.

Will the hammer holder fit non-Perkins belts?

The clip-on version is universal. The holster version is designed specifically for the Perkins belt system.

Where is the toolbelt made?

Our Perkins Builder Belts are proudly manufactured in Thailand. We partner with skilled craftsmen there to ensure consistent quality and attention to detail, so each belt meets the high standards we set for performance, comfort, and durability.

Do you have a product warranty?

Yes - our 1-Year Quality Warranty ensures your products are free from defects in materials and workmanship under normal use for one full year from the date of purchase.

What changes took place with the launch of the second-generation toolbelt?

Toolbelt:- Removed rear drill clips - Rear chalk line pouch now sold separately- Slimmer buckle design to reduce cost, same great quality- Updated tape measure pocket for faster access- Extra carpenter pencil slots addedSuspenders:- New adjustment clips that stay closed more securely- Shorter straps with organizing loop- Removed magnetic holder and earphone pocket to simplify design and lower price

Why does my toolbelt not have the drill clips or earphone pocket?

Those were features of our original belt. The current Essential model removed them to streamline the system and reduce the price by $100. See the “second-generation” update above for more details.

No results could be found. Please try again with a different query.

Frequently Asked Questions

Be the first to know about new products, exclusive offers, and company updates.

Frequently Asked Questions

Example product title